Modular mini abattoir for rabbits "Sprut"

Modular mini abattoir for rabbits is primarily intended for installation in a stationary position for businesses or private households who are unable to equip their own facilities for slaughter.

Options:

1. Module Sprut-6M. Dimensions: DД6058 Х Ш2438 Х В2591мм. Allows you to mount the production line slaughter of dirty and clean areas.

2. Module Sprut-12M. Dimensions: Д12192 Х Ш2438 Х В2896мм. Allows you to mount the production line slaughter of dirty and clean areas + to equip the area of cutting and packing or freezer.

Modular massacre comes complete with all internal engineering systems: electricity, ventilation, water supply and Sewerage. Only needed an external source of water and electricity. As an additional option we can supply a tank or a septic tank for drainage. All that is required at the installation location is the availability of flat ground and columnar supports. Setting the container of the massacre can be carried out by unskilled workers, following our instructions.

Container with inner side coated sandwich panels grey colour with a thickness of 80mm, which provide insulation and are easy to clean when carrying out disinfection. The floor is sloped and includes a gutter to drain water after washing. Doors and Windows made of aluminum and plastic with energy-saving glass. Necessarily, as with any conventional slaughterhouses, there is a division between "dirty" (slaughter) and "clean".

In the equipment module and the manufacture of process equipment are only permitted by SanPiN materials!

модульная бойня

Standard features include the following equipment and engineering networks:

электрооборудование мини бойни

Power supply - connect the container to the power supply through a sealing distribution block mounted inside the module. The unit is equipped with safety sensors, and system overload. The electric cable and the connection point of the equipment is made in a sealed design with dual protection circuit, ensure the safety during operation.

 

 

 

 

 

 

 

 

Water - in module the slaughter of the completely assembled system hot and cold water from high-strength polypropylene pipes. Installed water fittings with flow meter and filter. Ensured the connection of process equipment and equipment sanitary hygiene. On vneshnei the side of the container module has a threaded connection to connect the cold water supply. To ensure plant hot water mounted electric heater.

 

 

 

 

 

 

 

Of a Sewerage and drainage

- the modular carnage fully installed drainage system with the "jet break" (SanPiN). Pipes and gutters laid according to the process of product processing, Ustani all relevant curves and gradients. The outer container connection of the massacre to the sewer system is via a standard 50mm pipe located in the lower part of the container module. If there is no centralized Sewerage system, a slaughterhouse additionally can be equipped with special "septic tank" sewage treatment saturated fat suspensions.

 

 

 

 

 

 

 

 

 

 
 

Heated

- by using powerful air curtains installed over doorways module.

 

 

 

 

 

Wall and floor

- carried materials authorized for use in plants for food production. The walls are insulated fire-resistant insulation, trimmed with white plastic panels. The floor is covered with a sealed plastic panels with anticollision coating. In the floor mounted chute to remove water after washing and disinfecting the room and equipment. In the floor in front of the set disinfection mats, providing disinfection of the soles of shoes when entering the room modular mini-massacre.

 

 

 

 

 

 

 
 

Suspension way.

Designed for the transportation of carcasses from dirty areas to clean. Carcasses are captured using special hangers and moved manually along the line, during the various stages of processing. The monorail is made on a closed circuit, so the movement of the carriages with pendants occurs in a circular pattern without the need for their removal and of repose.

 

 

 

 

 

 

Doors and Windows

is posted in accordance with the technological process of slaughter. Made from aluminum and plastic with glass panes providing heat and sound insulation.

 

 

 

 

 

 

 

Schematic diagram of the placement of modular sections binibini for processing rabbit

 

The minimum set of equipment necessary to begin operation of the line:

Электрооглушитель кролика

 
1. The device elektrooglusheniya rabbit.

The device is made in a convenient compact version, contact with ergonomic pistol and protection from the direct effects of current on human beings. The device provides stunning birds for up to 2 minutes, ensuring the functioning of the heart and a good bleeding of the carcass.

 

 

 

 

 

 

 

убой кролика

2. The plot of slaughter and bleeding.

The plot of modular slaughter slaughter rabbits, hydrophore:

- table for placing the rabbit

- electropolished device that provides immobilization but not the conciliation rabbit

roller bearings provide fixation of the carcass hanging on the conveyor line in the slaughter process

- the bathroom for blood collection. The blood is collected in the bowl and is discharged into a special tank made of hygienic plastic, located under the table top single blog slaughter.

 

 

 

 

 

Обесшкуривание кролика3. The plot of obesshkurivanija.

The plot of obesshkurivanija rabbits, hydrophore:

- suspended by the conveyor line, with the possibility of height adjustment

- technology Desk

- special holes in the countertop to collect the skins in the trash (the recycle bin is located below the process table)

- handwash with touch (automatic) switching on the water supply. The dispenser is equipped with an electronic thermostat, which ensures a stable supply of a predetermined temperature and volume of water.

 

 

 

Нутровка/потрошение кролика

4. Clean the area. The plot of otroki and sorting of products.

The plot of obesshkurivanija rabbits, hydrophore:

- suspended by the conveyor line, with the possibility of height adjustment

- roller hangers

technology Desk

special holes in the countertop for the collection and sorting of bodies, intended for further processing

- handwash with touch (automatic) switching on the water supply. The dispenser is equipped with an electronic thermostat, which ensures a stable supply of a predetermined temperature and volume of water.

- multifunction gun for nutrena and Narina washing carcasses. All pistols equipped with adjustable water flow, kuskowim valve, allows you to select different modes of cleaning.

 

Ванна для охлаждения тушек кролика

5. Bath for cooling.The cooling bath for rabbit carcasses

The cooling bath for carcasses of rabbits Osasuna:

- valves to fill and maintain the water level in the tub

- drain valves with the "jet break" (SanPiN) to allow quick emptying of the bath after the end of the shift and overflow valve, automatically maintaining the required level of water

analog thermometer to monitor water temperature

cover that allows you to turn the cooling in the working surface for the packing or of carcasses. (Tub comes with a lid separately)о)

 

 

 

Additionally, the processing equipment can deliver the following positions:

1) Disinfection:

- dezinfitsiruyuschee interchangeable mats.

- the UV lamp is activated for a certain time after the end robotc and cleaning.

device for cleaning disinfectants.

- liquid disinfection.

- electronic device for catching insects.

1) special Knives for slaughtering and butchering.

2) Fork for gutting.

3) Sets of uniforms.

4) air-conditioning System.

5) a Septic tank for sewage treatment.

6) special Scissors for cutting and cutting the legs.

7) Pneumatic system and air tools for butchering carcasses.

8) plastic Boxes for transportation of the finished product.

9) Grease trap to better wastewater treatment.

10) Technological tables

11) apparatus and machines for cutting

On the container include:

- Certificates of conformity for equipment.

- Sanitary-epidemiological conclusion on the materials ispolzuya in the production of slaughterhouses and the equipment.

- Technical documentation

- Documentation